Escape32 VT3k ESC 1/24 &1/18

VT3k Escape32 ESC — 1/24 & 1/18

The VT3k Escape32 ESC is hand-built and individually tested by me at VT3k Electronics before it leaves my shop.

Each ESC is assembled with attention to detail and tested before shipping. This is not simply a mass-produced ESC with a VT3k label — it is a product I personally build, inspect, and stand behind.

Power & Battery Setup

The Escape32 is designed primarily for 3S–4S LiPo operation.

3S LiPo is recommended for most applications.
4S LiPo can be used when the motor and rest of the electronics are properly rated for 4S.

Although the ESC can operate on 2S LiPo, 2S is not recommended because the system will be underpowered compared with its intended 3S–4S operating range.

External BEC

The Escape32 uses an external BEC rather than relying on an internal BEC.

This allows the power system and receiver/servo electronics to be configured appropriately for the individual build. Make sure the external BEC voltage and current output are suitable for the receiver, servo, and other electronics being powered.

Built & Tested by VT3k

Every Escape32 is hand-built, inspected, and tested by me before shipping. That hands-on process is an important part of what makes VT3k electronics different.

Recommended Battery: 3S–4S LiPo
2S: Compatible, but underpowered and not recommended
BEC: External BEC
Application: 1/24 & 1/18 scale
Built: Hand-built and individually tested by VT3k Electronics

VT3k Escape32 ESC Limited Warranty

60-Day Limited Warranty

VT3k Electronics stands behind the quality of the VT3k Escape32 ESC. This product is backed by a 60-day (2-month) Limited Warranty from the date of the original purchase against defects in materials and workmanship.

If a manufacturing defect is confirmed during the warranty period, VT3k Electronics will, at its discretion, repair or replace the defective ESC with the same model or an equivalent replacement.

Warranty Exclusions

This warranty does not apply to products that have been damaged as a result of:

● Incorrect installation or wiring.

● Reverse battery polarity or operation outside the recommended voltage range.

● Water, moisture, corrosion, or other liquid-related damage.

● Physical abuse, crashes, drops, or impact damage.

● Excessive heat caused by improper gearing, overloading, or insufficient cooling.

● Improper programming or setup.

● Unauthorized modifications, disassembly, or repair attempts.

● Use with incompatible motors, batteries, or electronic components.

● Normal wear, cosmetic blemishes, or damage that does not affect the operation of the product.

Warranty Service

To request warranty service, please contact VT3k Electronics and provide:

● Proof of purchase.

● Order number.

● A description of the issue.

● Photos or video of the product and installation if requested.

VT3k Electronics may require the ESC to be returned for inspection before a warranty claim can be processed.

Warranty Terms

This Limited Warranty is valid only for the original purchaser and is non-transferable.

The warranty is limited exclusively to the repair or replacement of the ESC. VT3k Electronics shall not be liable for any indirect, incidental, or consequential damages, including damage to vehicles, motors, batteries, receivers, servos, or any other equipment resulting from the use or failure of the product.

Shipping costs associated with warranty service are the responsibility of the customer unless otherwise authorized by VT3k Electronics.

VT3k Electronics reserves the right to inspect all products submitted for warranty evaluation and to determine whether the failure is covered under the terms of this warranty.